X International Conference on Science, Technology and Innovation for Society: Proceedings Papers

Ahmad, H. A. (2011). Egg production forecasting: Determining Efficient Modeling Approaches. Journal of Applied Poultry Research, 20(4), 463-473. https://doi.org/10.3382/japr.2010-00266

Al Jitan, S., Alkhoori, S. A., & Yousef, L. F. (2018). Phenolic Acids From Plants: Extraction and Application to Human Health. Studies in Natural Products Chemistry, 58, 389-417. https://doi.org/10.1016/B978-0-444-64056-7.00013-1

Alam, M. and Jeong, J. (2020). Calculation of the Thermodynamic Properties of R448A and R449A in a Saturation Temperature Range of 233.15 K to 343.15 K Using Molecular Dynamics Simulations. International Communications in Heat and Mass Transfer, 116, 104717. https://doi.org/10.1016/J.ICHEATMASSTRANSFER.2020.104717

Alanya, B., Dextre, K., Nunez, V., Marcelo, G., and Alvarez, J. Improving the cutting process through lean manufacturing in a peruvian textile SME, In: IEEE International Conference on Industrial Engineering and Engineering Management, 1117-1121. IEEM, Singapore (2020). https://doi.org/10.1021/acs.iecr.0c06232

Albiño. (2020). Los sistemas de producción de cacao del cantón Shushufindi y su resiliencia al cambio climático. Revista Latinoamericcana de Estudios SocioAmbientales, 27, 90-114.

Alshoaibi, A. and Ali-Fageehi, Y. (2022). 3D modelling of fatigue crack growth and life predictions using ANSYS. Ain Shams Engineering Journal, 13(4), 101636. https://doi.org/10.1016/J.ASEJ.2021.11.005

Altinkaynak, M. (2021). Exergetic Performance Analysis of Low GWP Alternative Refrigerants for R404A in a Refrigeration System. International Journal of Low-Carbon Technologies, 16(3), 842-850. https://doi.org/10.1093/ijlct/ctaa104

Álvarez, Vera, J., Vallejo, C., & Tuarez, D. (2020). Aprovechamiento de almendras de jackfruit adicionado manteca de cinco clones experiemntales de cacao extraída apartir de mazorcas infecadas con moniliasis para la obtención de crema de chocoalte blanco. Universidad, Ciencia y Tecnología, 1, 61-68.

Amaral, F., Matia, E., Oliveira Júnior, A., Zorawski, M., Queiroz, J., & Leitão, P. (2023). Módulo de aprendizaje para diseñar placas de circuito impreso para dispositivos basados en el IoT

Amazônia, B., Carmosina, A., Queiroz, S., Marcia, A., Bizerra, C., & Lopes Machado, A. (n.d.). NOTA CIENTÍFICA Antioxidant and antimicrobial activities of organic extracts of Ixora coccínea L Atividades antioxidantes e antimicrobianas de extratos orgânicos de Ixora coccínea L 1* Esta obra estaíicenciada sob uma Licença Creative Commons Attribution. https://doi.org/10.18561/2179-5746/biotaamazonia.v8n4p49-53

American Metals Co. (2024). A36 Steel Technical Datasheet. https://www.metalshims.com/t-A36-Steel-Technical-Datasheet.aspx

Anderson, A., Rezaie, B. and Rosen, M. A. (2021). An Innovative Approach to Enhance Sustainability of a District Cooling System by Adjusting Cold Thermal Storage and Chiller Operation. Energy, 214, 118949. https://doi.org/10.1016/J.ENERGY.2020.118949

Andersson, M. and Gradstein, S. (2005). Impact of management intensity on non-vascular epiphyte diversity in cacao plantations in western ecuador. Biodiversity and Conservation, 14(5), 1101-1120. https://doi.org/10.1007/s10531-004-7840-5

Andrés Cadena, K. M. (2020). Evaluation of gene expression involved in the biosynthesis of antimicrobial lipopeptides in Bacillus megaterium using RT- qPCR. Universidad Politécnica Salesiana Ecuador, 91.

Arango, C. S. (2015). Use of liquid fermentation of Lentinula edodes (shiitake) for the production of bioactive secondary metabolites and evaluation of its potential use in the production of a functional food. Universidad Nacional De Colombia.

Ardusso, M., Forero-López, A., Buzzi, N., Spetter, C., and Fernández-Severini, M. (2021). COVID-19 pandemic repercussions on plastic and antiviral polymeric textile causing pollution on beaches and coasts of South America. Science of The Total Environment, 763. 144365. https://doi.org/10.1016/j.scitotenv.2020.144365

Ariza Yesid, S. L. (2012). Determination of secondary metabolites from Bacillus subtilis with biocontrol effect on Fusarium sp. Journal scielo.

Aronés Jara, M. R., Cárdenas Landeo, E., Luna Molero, H. R., Barbarán Vilcatoma, S. M., & Gómez Quispe, M. (2022). TAMIZAJE FITOQUÍMICO, CONTENIDO DE COMPUESTOS FENÓLICOS Y POTENCIAL ANTIOXIDANTE DE TRECE PLANTAS MEDICINALES DE LOS AFLORAMIENTOS ROCOSOS DEL BOSQUE DE PIEDRAS DE HUARACA EN PERÚ. Revista de La Sociedad Química Del Perú, 88(2). https://doi.org/10.37761/rsqp.v88i2.388

Arroba, C., Flores, M.., Salinas, J., Ortega, S. and Ortega, H. (2021). Experimental Tests and Numerical Analysis of the Structure of the Alternative Composite Material for the Repair of Flight Surfaces in Aircraft. Enfoque UTE, 12(2), 37-51. https://doi.org/10.29019/ENFOQUEUTE.723

ASTM International. (2019). A36/A36M Standard Specification for Carbon Structural Steel. https://www.astm.org/a0036_a0036m-14.html

ASTM International. (2024). E8/E8M Standard Test Methods for Tension Testing of Metallic Materials. https://www.astm.org/e0008_e0008m-22.html

Babu, A. K., Kumaresan, G., Raj, V. A. A., & Velraj, R. (2018). Review of leaf drying: Mechanism and influencing parameters, drying methods, nutrient preservation, and mathematical models. In Renewable and Sustainable Energy Reviews (Vol. 90, pp. 536-556). Pergamon. https://doi.org/10.1016/j.rser.2018.04.002

Barenghi, L., Barenghi, A., Cadeo, C. and Di Blasio, A. (2019). Innovation by Computer-Aided Design/Computer-Aided Manufacturing Technology: A Look at Infection Prevention in Dental Settings. BioMed Research International, 2019. https://doi.org/10.1155/2019/6092018

Barukcic Revelo, A. M., & Sola Montero, M. J. (2015). Desarrollo de formulaciones fito - cosméticas antioxidantes empleando como sustancia activa el extracto seco de Cinchona pubescens Vahl, Rubiaceae (Cascarilla). http://dspace.ups.edu.ec/handle/123456789/9377

Bautista-Villegas, E. (2022). Metodologías agiles XP y Scrum, empleadas para el desarrollo de páginas web, bajo MVC, con lenguaje PHP y framework Laravel. Revista Amazonía Digital, 1(1), e168-e168. https://doi.org/10.55873/RAD.V1I1.168

Behzadifar, J., Mohammad-Ali Boutorabi, S., & Saghafian Larijani, H. (2024). Effects of austempering on the microstructure and mechanical properties of high-strength nanostructured bainitic steel containing 3.5 wt% aluminum. Journal of Materials Research and Technology, 29(December 2023), 344-352. https://doi.org/10.1016/j.jmrt.2024.01.054

Berselli, G., Bilancia, P. and Luzi, L. (2020). Project-based Learning of Advanced CAD/CAE Tools in Engineering Education. International Journal on Interactive Design and Manufacturing, 14(3), 1071-1083. https://doi.org/10.1007/s12008-020-00687-4

Bhadu, J., Kumar, P., Bhamu, J. et al. (2022). Lean production performance indicators for medium and small manufacturing enterprises: modelling through analytical hierarchy process. International Journal of System Assurance Engineering and Management, 13. 978-997. https://doi.org/10.1007/s13198-021-01375-6

Bisht, A., & Garg, N. (2024). Harnessing the role of arbuscular mycorrhizae in arresting nodular senescence by modulating osmolyte synthesis and ascorbate-glutathione pool in cadmium stressed pigeon pea. Plant Growth Regulation, 102(2), 409-427.

Blommaert, H., Aucour, A., Wiggenhauser, M., Moens, C., Télouk, P., Campillo, S., … & Sarret, G. (2022). From soil to cacao bean: unravelling the pathways of cadmium translocation in a high cd accumulating cultivar of theobroma cacao l. Frontiers in Plant Science, 13. https://doi.org/10.3389/fpls.2022.1055912

Bohler, E. (2021). Manual de Aceros Especiales BOHLER (p. 120).

Boon Sin, A., Zailani, S., Iranmanesh, M. and Ramayah, T. (2015). Structural Equation Modelling on Knowledge Creation in Six Sigma DMAIC Project and its Impact on Organizational Performance. International Journal of Production Economics, 168, 105-117. https://doi.org/10.1016/j.ijpe.2015.06.007

Brown, C. S., Speer, J. G., & De Moor, E. (2023). Influence of retained austenite on abrasive wear performance of bainitic steels. Wear, 522(December 2022), 204720. https://doi.org/10.1016/j.wear.2023.204720

C. RODRÍGUEZ-CABRERA, J.J. RUÍZ-MONDRAGÓN, F. MACÍAS-LÓPEZ, A. H.-H. (2019). Caracterización Microestructural de Cupones de Matrices para Forja de Acero AISI/SAE l6 Reparados Mediante el Proceso “Flood Welding”. 4 to Foro de Ingeniería e Investigación En Materiales, 16, 543-551.

Calderón, L., Bohórquez, O., Rojas, M. and Pertuz, A. (2021). Experimental Relationship of Tensile Strength and Hardness of Welded Structural Steel. Journal of Physics: Conference Series, 2046(1), 012065. https://doi.org/10.1088/1742-6596/2046/1/012065

Carrasco, H. C. J. (2022). Análisis de metodologías ágiles para el desarrollo de aplicaciones Web. http://dspace.utb.edu.ec/handle/49000/13044

Carvalho, R., Lobo, M., Oliveira, M., Raquel, A., Alonso, V., Lopes, F. and Souza, J. (2021). Analysis of Root Causes of Problems Affecting the Quality of Hospital Administrative Data: A Systematic Review and Ishikawa Diagram. International Journal of Medical Informatics. 156, 104584. https://doi.org/10.1016/j.ijmedinf.2021.104584

Castañeda Castañeda, B., Ramos Llica, E., & Ibáñez Vasquez, L. (2008). Evaluación de la capacidad antioxidante de siete plantas medicinales peruanas. Horizonte Médico (Lima), 8(1), 56-72. https://doi.org/10.24265/horizmed.2008.v8n1.04

Castaño Amores, C., & Hernández Benavides, P. J. (2018). Activos antioxidantes en la formulación de productos cosméticos antienvejecimiento. Ars Pharmaceutica (Internet), 59(2), 77-84. https://doi.org/10.30827/ars.v59i2.7218

Ccolque, J. L. C. (2019). Desarrollo de un sistema web utilizando angular framework y rest (Transferencia de estado representacional) para la gestión de historias electrónicas. Universidad Peruana Unión. https://repositorio.upeu.edu.pe/handle/20.500.12840/3295

Cerda, J., Vera, C., and Rada, G. (2013). Odds ratio: aspectos teóricos y prácticos. Revista médica de Chile, 141(10). 1329-1335. https://doi.org/10.4067/S0034-98872013001000014

Chacón, Gómez, C., & Márquez, V. (2007). Caracterización morfológica de frutos y almendras de plantas de cacao (Theobroma cacao L.) en la región suroccidental de Venezuela. Revista de La Facultad de Agronomía de La Universidad Del Zulia, 24(1), 202-207.

Cheaib, D., El Darra, N., Rajha, H. N., El-Ghazzawi, I., Maroun, R. G., & Louka, N. (2018). Effect of the extraction process on the biological activity of lyophilized apricot extracts recovered from apricot pomace. Antioxidants, 7(1), 11. https://doi.org/10.3390/antiox7010011

Chen, A., Chen, D., Hu, X., Harth, C., Young, D., Mühle, J., Krummel, P., O’Doherty, S., Weiss, R., Prinn, R. and Fang, X. (2023). Historical Trend of Ozone-depleting Substances and Hydrofluorocarbon Concentrations During 2004-2020 Derived from Satellite Observations and Estimates for Global Emissions. Environmental Pollution, 316, 120570. https://doi.org/10.1016/J.ENVPOL.2022.120570

Chohan, U. W. (2022). Web 3.0: The Future Architecture of the Internet? SSRN Electronic Journal. https://doi.org/10.2139/SSRN.4037693

Cincovic, J., Delcev, S., & Draskovic, D. (2019). Architecture of web applications based on Angular Framework: A Case Study. https://www.eventiotic.com/eventiotic/files/Papers/URL/df6b5054-816e-4bee-b983-663fb87be2cd.pdf

CRESPO, J. B. (2022). Isolation, characterization, and identification of filamentous fungi associated with cancer symptoms in dragon fruit plantations. (Hylocereus spp.). Escuela Superior Politécnica del Chimborazo.

Da Costa, A. Z., Figueroa, H. E., & Fracarolli, J. A. (2020). Computer vision based detection of external defects on tomatoes using deep learning. Biosystems Engineering, 190, 131-144.

Dalle Zotte, A., Cullere, M., Pellattiero, E., Sartori, A., Marangon, A. and Bondesan, V. (2021). Is the Farming Method (cage, barn, organic) a Relevant Factor for Marketed Egg Quality Traits? Livestock Science, 246, 104453. https://doi.org/10.1016/j.livsci.2021.104453

Daniel Eugui, J. P. (2022). Combined use of Trichoderma and beneficial bacteria (mainly Bacillus and Pseudomonas): Development of microbial synergistic bio-inoculants in sustainable agriculture. ELSEVIER, 19.

Das, N., Islam, M. E., Jahan, N., Islam, M. S., Khan, A., Islam, M. R., & Parvin, M. S. (2014). Antioxidant activities of ethanol extracts and fractions of Crescentia cujete leaves and stem bark and the involvement of phenolic compounds. BMC Complementary and Alternative Medicine, 14(1), 1-9. https://doi.org/10.1186/1472-6882-14-45

Das, S., Sarkar, S., Das, A., Das, S., Chakraborty, P., and Sarkar, J. (2021). A comprehensive review of various categories of face masks resistant to Covid-19. Clinical Epidemiology and Global Health, 12. 100835. https://doi.org/10.1016/j.cegh.2021.100835

De Mast, J. and Lokkerbol, J. (2012). An Analysis of the Six Sigma DMAIC Method From the Perspective of Problem Solving. International Journal of Production Economics, 139(2), 604-614. https://doi.org/10.1016/j.ijpe.2012.05.035

Deeb, S., Haouzi, H. B. El, Aubry, A. and Dassisti, M. (2018). A Generic Framework to Support the Implementation of Six Sigma Approach in SMEs. IFAC-PapersOnLine, 51(11), 921-926. https://doi.org/10.1016/j.ifacol.2018.08.490

Del Castillo, B. A. L., Domingo, D. J. A., Herrera, G. G., & López, D. M. S. (2021). Sentidos y perspectivas de la investigación formativa en tiempos de pandemia: caso ingeniería. Universidad Libre.

Demirci, O., and Gunduz, T. (2020. Combined application proposal of value stream mapping (VSM) and methods time measurement universal analysis system (MTM-UAS) methods in textile industry. Journal of Industrial Engineering, 31(2). 234-250. https://doi.org/10.46465/endustrimuhendisligi.728061

Dene, G., & James, O. (2021). Electronic Literature as Digital Humanities. Bloomsbury Academy, 2, 151-162. https://library.oapen.org/bitstream/handle/20.500.12657/58859/1/9781501363481.pdf#page=162

Dhoska, K. (2019). Tensile Testing Analysis of the HRB400 Steel Reinforcement Bar. International Journal of Innovative Technology and Interdisciplinary Sciences, 2(3), 253-258. https://doi.org/10.15157/IJITIS.2019.2.3.253-258

Ding, W., & Scheer, L. (2004). Syringe filter efficiency and the effect of filtration on HPLC column life. EBR - European Biopharmaceutical Review, AUTUMN, 60-63. www.pall.com/contact

Dong, Y., Coleman, M. and Miller, S. (2021). Greenhouse Gas Emissions from Air Conditioning and Refrigeration Service Expansion in Developing Countries. Annual Review of Environment and Resources, 46, 59-83. https://doi.org/10.1146/ANNUREV-ENVIRON-012220-034103/CITE/REFWORKS

Drewnick, F., Pikmann, J., Fachinger, F., Moormann, L., Sprang, F., and Borrmann, S. (2021). Aerosol filtration efficiency of household materials for homemade face masks: Influence of material properties, particle size, particle electrical charge, face velocity, and leaks. Aerosol Science and Technology, 55(1). 63-79. https://doi.org/10.1080/02786826.2020.1817846

Effendy, F., Taufik, & Adhilaksono, B. (2021). Performance Comparison of Web Backend and Database: A Case Study of Node.JS, Golang and MySQL, Mongo DB. Recent Advances in Computer Science and Communications, 14(6), 1955-1961. https://doi.org/10.2174/2666255813666191219104133

EPA Method 3051A: Microwave Assisted Acid Digestion of Sediments, Sludges, and Oils | US EPA. (2023, 31 julio). US EPA. https://www.epa.gov/esam/us-epa-method-3051a-microwave-assisted-acid-digestion-sediments-sludges-and-oils

Erazo-Arteaga, V. (2022). El diseño, la Manufactura y Análisis Asistido por Computadora (CAD/CAM/CAE) y Otras Técnicas de Fabricación Digital en el Desarrollo de Productos en América Latina. Información Tecnológica, 33(2), 297-308. https://doi.org/10.4067/S0718-07642022000200297

Erazo, Vera, J., Tuarez, D., Vásquez, L., Alvarado, K., Zambrano, C., Mindiola, V., Mora, R., & Revilla, K. (2023). Caracterización fenotípica en flores de cacao (theobroma cacao l.) en 40 híbridos experimentales en la finca experimental La Represa. Revista Bionatura, 8(3), 1-9. https://doi.org/http://dx.doi.org/10.21931/RB/2023.08.03.11

Ersöz, B., Bilimleri, B., & Dergisi, T. (2020). Yeni Nesil Web Paradigması-Web 4.0. Journal of Computer Science and Technologies, 1(2), 58-65. https://dergipark.org.tr/en/pub/bibted/issue/57253/796030

Fajardo, J., Villa, M., Pozo, J. and Urgilés, D. (2019). Characterization of the Tensile Properties of an Epoxy-Carbon Laminated Composite Used in the Development of a Single-seater Formula SAE Type. Enfoque UTE, 10(3), 1-12. https://doi.org/10.29019/ENFOQUE.V10N3.381

Falivene, L., Cao, Z., Petta, A., Serra, L., Poater, A., Oliva, R., Scarano, V. and Cavallo, L. (2019). Towards the Online Computer-aided Design of Catalytic Pockets. Nature Chemistry 2019 11:10, 11(10), 872-879. https://doi.org/10.1038/s41557-019-0319-5

Fan, S., Li, J., Zhang, Y., Tian, X., Wang, Q., He, X & Huang, W. (2020). On line detection of defective apples using computer vision system combined with deep learning methods. Journal of Food Engineering, 286, 110102.

Fan, Y., Cai, Y., & Yang, H. (2024). A detection algorithm based on improved YOLOv5 for coarse-fine variety fruits. Food Measure, 18, 1338-1354. https://doi.org/10.1007/s11694-023-02274-z

Fernádez-Tamayo, M. L., Mondelo-García, F., Parada-ExpÃtextthreesuperiorsito, A., & Pino, A. S. (2022). Influencia del tratamiento térmico sobre microestructura y dureza de esteras en acero Hadfield con cromo. Ingenieria Mecánica, 25, 17-28.

Filipiak-Florkiewicz, A., Deren, K., Florkiewicz, A., Topolska, K., Juszczak, L. and Cieślik, E. (2017). The Quality of Eggs (organic and nutraceutical vs. conventional) and their Technological Properties. Poultry Science, 96(7), 2480-2490. https://doi.org/10.3382/ps/pew488

Foster, G., Waldman, N., and Griskey, R. (1966). Pressure-volume-temperature behavior of polypropylene. Polymer Engineering and Science, 6(2). 131-134.

Gado, M., Ookawara, S., Nada, S. and Hassan, H. (2022). Renewable Energy-based Cascade Adsorption-Compression Refrigeration System: Energy, Exergy, Exergoeconomic and Enviroeconomic Perspectives. Energy, 253, 124127. https://doi.org/10.1016/J.ENERGY.2022.124127

Galvis, D. A., Jaimes-Suárez, Y. Y., Rojas Molina, J., Ruiz, R., León-Moreno, C. E., & Carvalho, F. E. L. (2023). Unveiling cacao rootstock-genotypes with potential use in the mitigation of cadmium bioaccumulation. Plants, 12(16), 2941. https://doi.org/10.3390/plants12162941

García-Garrino, C., Careglio, C., Pacini, E., Miraso, A., Papeleux, L. and Ponthot, J. (2021). Procesamiento de Problemas de Mecánica de Sólidos en Entornos de Cloud Computing. XXIII Workshop de Investigadores En Ciencias de La Computación (WICC 2021, Chilecito, La Rioja), August 2021, 963-968. http://sedici.unlp.edu.ar/handle/10915/120382

García-Granados, R. U., Cruz-Sosa, F., Alarcón-Aguilar, F. J., Nieto-Trujillo, A., & Gallegos-Martínez., M. E. (2019). ANÁLISIS FITOQUÍMICO CUALITATIVO DE LOS EXTRACTOS ACUOSOS DE Thalassia testudinum BANKS EX KÖNING ET SIMS DE LA LOCALIDAD DE CHAMPOTÓN, CAMPECHE, MÉXICO, DURANTE EL CICLO ANUAL 2016-2017. Polibotánica, 48. https://doi.org/10.18387/polibotanica.48.12

García, A; Lopez, V; Saucedo, M ;Garcia, J; Meza, E. (2022). Phase Transformations during heat treatment of austempering of a steel 0.41 % C - 0.7 % Mn - 2.15 % Si - 0.013 % Al. 10, 125-128.

Garcia, Serna, A., Códoba, D., Marín, J., Montalvo, C., & Ordoñez, G. (2019). Estudio de la fermentación espontanea de cacao (Theobroma Cacao l.) y evaluación de la calidad de los granos en una unidad productiva a pequeña escala. Revista Colombiana de Investigaciones Agroindustriales, 6(1), 41-51. https://doi.org/https://doi.org/10.23850/24220582.1635

Ghanbarpour, M., Mota-Babiloni, A., Makhnatch, P., Badran, B., Rogstam, J. and Khodabandeh, R. (2021). ANN Modeling to Analyze the R404A Replacement with the Low GWP Alternative R449A in an Indirect Supermarket Refrigeration System. Applied Sciences 2021, Vol. 11, Page 11333, 11(23), 11333. https://doi.org/10.3390/APP112311333

Ghimire, D. (2020). Comparative study on Python web frameworks: Flask and Django. https://www.theseus.fi/handle/10024/339796

Giffary, R. S., & Ramadhani, E. (2022). Implementasi Bcrypt dengan SHA-256 pada Password Pengguna Aplikasi Golek Kost. Jurnal Sistem Komputer Dan Informatika (JSON), 3(4), 543-546. https://doi.org/10.30865/json.v3i4.4285

González, O., Martínez, G. and Graciano, C. (2020). Evaluación Paramétrica de las Principales Variables Geométricas en el Diseño de un Tren de Aterrizaje para un Avión Notripulado Utilizando el Método de los Elementos Finitos. Revista UIS Ingenierías, 19(2), 149-160. https://doi.org/10.18273/REVUIN.V19N2-2020017

Guleria, P., Pathania, A., Bhatti, H., Rojhe, K., and Mahto, D. (2021). Leveraging Lean Six Sigma: Reducing defects and rejections in filter manufacturing industry. Materials Today: Proceedings, 46(17). 8532-8539. https://doi.org/10.1002/pen.760060208

Gunter, S., Marchenko, E., Yasenchuk, Y., Baigonakova, G. and Volinsky, A. (2021). Portable Universal Tensile Testing Machine for Studying Mechanical Properties of Superelastic Biomaterials. Engineering Research Express, 3(4), 045055. https://doi.org/10.1088/2631-8695/AC41B4

Hammershøj, M. and Steenfeldt, S. (2015). Organic Egg Production. II: The Quality of Organic Eggs is Influenced by Hen Genotype, Diet and Forage Material Analyzed by Physical Parameters, Functional Properties and Sensory Evaluation. Animal Feed Science and Technology, 208, 182-197. https://doi.org/10.1016/j.anifeedsci.2015.07.012

Hara-Chakravarty, K., Sadi, M., Chakravarty, H., Sulaiman-Alsagri, A., James-Howard, T. and Arabkoohsar, A. (2022). A Review on Integration of Renewable Energy Processes in Vapor Absorption Chiller for Sustainable Cooling. Sustainable Energy Technologies and Assessments, 50, 101822. https://doi.org/10.1016/J.SETA.2021.101822

Hassan, M., Yeom, B., Wilkie, A., Pourdeyhimi, B., and Khan, S. (2013). Fabrication of nanofiber melt-blown membranes and their filtration properties. Journal of Membrane Science, 427. 336-344. https://doi.org/10.1016/j.memsci.2012.09.050

Heredia-Aricapa, Y., Belman-Flores, J., Mota-Babiloni, A., Serrano-Arellano, J. and García-Pabón, J. (2020). Overview of Low GWP Mixtures for the Replacement of HFC Refrigerants: R134a, R404A and R410A. International Journal of Refrigeration, 111, 113-123. https://doi.org/10.1016/J.IJREFRIG.2019.11.012

Heydrich, M. (2012). Antagonism of Bacillus spp. against phytopathogenic fungi in rice cultivation (Oryza sativa L.). scielo.sld.cu.

Hron, M., & Obwegeser, N. (2022). Why and how is Scrum being adapted in practice: A systematic review. Journal of Systems and Software, 183, 111110. https://doi.org/10.1016/J.JSS.2021.111110

Huang, C.-T., Hung, F.-Y., Zhao, J.-R., & Hsieh, H.-Y. (2023). Microstructure and mechanical properties of 631 Stainless Steel: Study of Yield Slip and Strain Rate Mechanism with Austempering and Martempering. Journal of Alloys and Metallurgical Systems, 2, 100015. https://doi.org/https://doi.org/10.1016/j.jalmes.2023.100015

Hutten, I. Handbook of Nonwoven Filter Media, Oxford: Elsevier Science & Technology (2015).

Huynh, K. (2020). The development of a web application: The new trend - Serverless application. Turku Amk. http://www.theseus.fi/handle/10024/344206

INIAP. (2020). Biological Control: A tool for sustainable agriculture, a viewpoint on its benefits in Ecuador. Journal scielo.

Intriago, Chávez, G., Vásquez, L., Alvarado, K., Escobar, R., Vera, J., Radice, M., & Raju, M. (2023). Evaluación del contenido de cadmio y caracterización fisicoquímica de almendras y pasta de cacao (Theobroma cacao). Innovaciencia, 11(1), 1-11. https://doi.org/https://doi.org/10.15649/2346075X.3411

Ishtiaq, M., Inam, A., Tiwari, S., & Seol, J. B. (2022). Microstructural, mechanical, and electrochemical analysis of carbon doped AISI carbon steels. Applied Microscopy, 52(1). https://doi.org/10.1186/s42649-022-00079-w

ISO 1183-1: 2019: Plastics - Methods for determining the density of non-cellular plastics. Part 1: Immersion method, liquid pycnometer method, and titration method. https://www.iso.org/standard/74990.html

Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2022). Artificial intelligence applications for industry 4.0: A literature-based study. Journal of Industrial Integration and Management, 7(01), 83-111.

Jeyakumar, N., Uthranarayan, C. and Narayanasamy, B. (2022). Energy Conservation in the Refrigeration System Through Improvement of Coefficient of Performance and Power Consumption Reduction Using Nanofluids. International Journal of Ambient Energy, 43(1), 1120-1126. https://doi.org/10.1080/01430750.2019.1687333

Ju, J., Boisvert, J., and Zuo, Y. (2021). Face masks against COVID-19: Standards, efficacy, testing and decontamination methods. Advances in Colloid and Interface Science, 292. 102435. https://doi.org/10.1016/j.cis.2021.102435

Juárez-Luna, G. and Ortiz-Gálvez, P. (2021). Importancia del Mallado de Elementos Finitos de Muros de Mampostería Confinada en el Análisis Sísmico de Edificios. Revista Internacional de Ingeniería de Estructuras, 26(4), 712-745. https://doi.org/10.24133/RIIE.V26I4.2640

Kaluža, M., Kalanj, M., & Vukelić, B. (2019). A comparison of back-end frameworks for web application development. Zbornik Veleučilišta u Rijeci, 7(1), 317-332. https://hrcak.srce.hr/en/219995

Kancherla, N., Dhakshinamoothi, A., Chitra, K., & Komaram, R. B. (2019). Maedica-a Journal of Clinical Medicine Preliminary Analysis of Phytoconstituents and Evaluation of Anthelminthic Property of Cayratia auriculata (In Vitro) Preliminary analysis of Phytoconstituents and evaluation of anthelminthic ProPerty of cayratia auri. Maedica A Journal of Clinical Medicine, 14(4), 350-356. https://doi.org/10.26574/maedica.2019.14.4.350

Kang, H., & Chen, C. (2020). Fruit detection, segmentation and 3D visualisation of environments in apple orchards. Computers and Electronics in Agriculture, 171, 105302.

Khar’kova, E., Mendeleev, D., Guseva, M. et al. (2019). Structure and Properties of Polymer-Polymer Composites Based on Biopolymers and Ultra-High Molecular Weight Polyethylene. Journal of Polymers and the Environment, 27. 165-175. https://doi.org/10.1007/s10924-018-1326-0

Kinnunen, J. (2023). Designing a Node.js full stack web application. https://www.theseus.fi/bitstream/handle/10024/793330/Kinnunen_Janne.pdf?sequence=2

Krogh, J. W. (2020). MySQL Workbench. In MySQL 8 Query Performance Tuning: A Systematic Method for Improving Execution Speeds (pp. 199-226). Apress. https://doi.org/10.1007/978-1-4842-5584-1_11

Kujala, A. (2023). Development of a modern full stack web application. Turku Amk.

Kulkarni, S., Prasanna, N., Mirunalini, S., Akshaya, C., Deekshitha, R., Kousalya, N. and Agalya, A. (2021). Enhancing the Process Capability of Machining Process of Boring Tool Holder by Application of Six Sigma Methodology. Materials Today: Proceedings, 52(3), 329-338. https://doi.org/10.1016/j.matpr.2021.09.043

Kutter, S., Spronken, M., Fraaij, P., Fouchier, R., and Herfst, S. (2018). Transmission routes of respiratory viruses among humans. Current Opinion in Virology, 28. 142-151. https://doi.org/10.1016/j.coviro.2018.01.001

La, A., Toro, R., Fredy, G., López, V., & Taipe, M. (2011). Evaluación De La Actividad Antioxidante Del Pisco Peruano Mediante Voltametría Cíclica. Rev Soc Quím Perú, 77(2), 127-134. http://www.scielo.org.pe/scielo.php?script=sci_arttext&pid=S1810-634X2011000200005&lng=es&nrm=iso&tlng=es

Lagunes, Ramírez, M., Ortiz García, C. F., & Gutiérrez, O. A. (2018). VARIACIÓN MORFOLÓGICA DE FRUTOS Y SEMILLAS DE CACAO (Theobroma cacao L.) DE PLANTACIONES EN TABASCO, MÉXICO. Revista Fitotecnia Mexicana, 41(2), 117-125. https://doi.org/10.35196/rfm.2018.2.117-125

Larsen, I. L. and Thorstensen, R. T. (2020). The Influence of Steel Fibres on Compressive and Tensile Strength of Ultra High Performance Concrete: A Review. Construction and Building Materials, 256, 119459. https://doi.org/10.1016/J.CONBUILDMAT.2020.119459

Lee, J., Seo, G., Mun, J., Park, M. and Kim, S. (2020). Thermal and Mechanical Design for Refrigeration System of 10 MW Class HTS Wind Power Generator. IEEE Transactions on Applied Superconductivity, 30(4). https://doi.org/10.1109/TASC.2020.2973117

Lee, S.-I., Lee, J.-M., Kim, S.-G., Song, Y.-B., Kim, H.-K., Shim, J.-H., & Hwang, B. (2022). Influence of austempering temperature on microstructure and mechanical properties of high-carbon nanostructured bainitic steels. Materials Science and Engineering: A, 848, 143334. https://doi.org/https://doi.org/10.1016/j.msea.2022.143334

Lesnierowski, G. and Stangierski, J. (2018). Trends in Food Science & Technology What’s New in Chicken Egg Research and Technology for Human Health Promotion? - A Review. Trends in Food Science & Technology, 71, 46-51. https://doi.org/10.1016/j.tifs.2017.10.022

Leung, N., Chu, D., Shiu, E. et al. (2020). Respiratory virus shedding in exhaled breath and efficacy of face masks. Nature Medicine, 26(5), 676-680. https://doi.org/10.1038/s41591-020-0843-2

Li, X., Zhang, Y., Shi, C. and Chen, X. (2020). Experimental and Numerical Study on Tensile Strength and Failure Pattern of High Performance Steel Fiber Reinforced Concrete Under Dynamic Splitting Tension. Construction and Building Materials, 259, 119796. https://doi.org/10.1016/J.CONBUILDMAT.2020.119796

Li, Y., Liang, M., Gao, L., Ayaz-Ahmed, M., Uy, J., Cheng, C., Zhou, Q., and Sun, C. (2021). Face masks to prevent transmission of COVID-19: A systematic review and meta-analysis. American Journal of Infection Control, 49(7). 900-906. https://doi.org/10.1016/j.ajic.2020.12.007

Liao, W., Chen, P., Hung, C. and Wagh, S. (2020). An Innovative Test Method for Tensile Strength of Concrete by Applying the Strut-and-Tie Methodology. Materials 2020, Vol. 13, Page 2776, 13(12), 2776. https://doi.org/10.3390/MA13122776

Lucchini, A., Carraretto, I., Colombo, L., Mazzeo, D., Pittoni, P. and Lipori, G. (2024). Convective Condensation of R449a Inside a Smooth Tube. Journal of Physics: Conference Series, 2685(1), 012062. https://doi.org/10.1088/1742-6596/2685/1/012062

Luis-Alaya, B., Toro, M., Calsina, R., Ogata-Gutiérrez, K., Gil-Polo, A., Ormeño-Orrillo, E., … & Zúñiga-Dávila, D. (2023). Evaluation of the presence of arbuscular mycorrhizae and cadmium content in the plants and soils of cocoa plantations in san martin, peru. Diversity, 15(2), 246. https://doi.org/10.3390/d15020246

Maarof, M. G. and Mahmud, F. (2016). A Review of Contributing Factors and Challenges in Implementing Kaizen in Small and Medium Enterprises. Procedia Economics and Finance, 35, 522-531. https://doi.org/10.1016/S2212-5671(16)00065-4

Mahindrakar, P., & Pujeri, U. (2020). Insights of JSON Web Token. International Journal of Recent Technology and Engineering (IJRTE), 6, 2277-3878. https://doi.org/10.35940/ijrte.F7689.038620

Márquez-Herrera, A., Saldaña-Robles, A., Zapata-Torres, M., Reveles-Arredondo, J. and De la Peña (2022). Duplex Surface Treatment on ASTM A-36 Steel by Slide Burnishing and Powder Pack Boriding. Materials Today Communications, 31, 103703. https://doi.org/10.1016/J.MTCOMM.2022.103703

Martínez, H. O. (2017). Biological control of phytopathogens using Trichoderma spp. Agro Productivity.

Mejía, Coronel Niño, R., Gálvez López, D., Rosas Quijano, R., & Vásquez Ovando, A. (2018). Efecto de la fermentación y del tostado sobre el contenido de aminas biogénicas en semillas de cacao. 3(12), 958-979. https://doi.org/10.19230/jonnpr.2778

Mejoramiento de la calidad del cultivo de cacao en ecuador. (2020). Revista Venezolana De Gerencia. https://doi.org/10.37960/rvg.v25i3.33375

Mex, R., Garma, P., Blanco, P., Robaldino, D., Campos-Marques, A., & Acal-Interián, D. (2019). Actividad Antioxidante de Ixora coccinea. Revista Iberoamericana de Ciencias, 6(3), 2-9. www.reibci.org

Miranda, G. A. (2020). Revista CIENCIA Y TECNOLOGÍA. 16(1), 9-20.

Molina, J. R., Zea, M. P., Contento, M. J., García, F. G., Metodologías, C. De, Rolando, J., Ríos, M., Paola, M., Ordóñez, Z., José, M., Segarra, C., Gustavo, F., & Zerda, G. (2018). Comparación de metodologías en aplicaciones web. 3c Tecnología: Glosas de Innovación Aplicadas a La Pyme, ISSN-e 2254-4143, Vol. 7, No. 1, 2018, Págs. 1-19, 7(1), 1-19. https://doi.org/10.17993/3ctecno.2018.v7n1e25.1-19

Molina, J. R., Zea, M. P., Contento, M. J., García, F. G., Rolando, J., Ríos, M., Paola, M., Ordóñez, Z., José, M., Segarra, C., Gustavo, F., & Zerda, G. (2017). Estado del arte: Metodologías de desarrollo en aplicaciones web. 3c Tecnología: Glosas de Innovación Aplicadas a La Pyme, ISSN-e 2254-4143, Vol. 6, No. 3, 2017, Págs. 54-71, 6(3), 54-71. https://doi.org/10.17993/3ctecno.2016.v6n3e23.54-71

Moreno, B., & Adames, J. (2022). Proceso del Forjado y sus Materiales más Utilizados en la Industria. Facultad de Informática, Electrónica y Comunicación, Escuela de Mecatrónica, 11.

Muhammad, H., Qasim, M., Ikram, A., Versiani, M. A., Tahiri, I. A., Yasmeen, K., Abbasi, M. W., Azeem, M., Ali, S. T., & Gul, B. (2020). Antioxidant and antimicrobial activities of Ixora coccinea root and quantification of phenolic compounds using HPLC. South African Journal of Botany, 135, 71-79. https://doi.org/10.1016/J.SAJB.2020.08.012

Nagpal, P., Goel, N., Sangwan, S., & Dixit, H. (2020). Design and Implementation of Hostel Management System Using Java and MySQL. LC International Journal of STEM (ISSN: 2708-7123), 1(4), 63-74. https://doi.org/10.5281/ZENODO.5149774

Nandakumar, N., Saleeshya, P. G. and Harikumar, P. (2020). Bottleneck Identification and Process Improvement by Lean Six Sigma DMAIC Methodology. Materials Today: Proceedings, 24, 1217-1224. https://doi.org/10.1016/j.matpr.2020.04.436

Nath, K. (2022). Evolution of the Internet from Web 1.0 to Metaverse: The Good, The Bad and The Ugly. Tech Rxiv. https://doi.org/10.36227/TECHRXIV.19743676.V1

Navarro Albert, E., Gisbert Soler, V. and Pérez Molina, A. (2017). Metodología e Implementación de Six Sigma. 3C Empresa: Investigación y Pensamiento Crítico, 6(5), 73-80. https://doi.org/10.17993/3cemp.2017.especial.73-80

Neira, D. (2016). Energy efficiency of cacao agroforestry under traditional and organic management. Agronomy for Sustainable Development, 36(3). https://doi.org/10.1007/s13593-016-0386-6

Nieves-Orduña, H., Müller, M., Krutovsky, K., & Gailing, O. (2021). Geographic patterns of genetic variation among cacao (theobroma cacao l.) populations based on chloroplast markers. Diversity, 13(6), 249. https://doi.org/10.3390/d13060249

Nikhil-Babu, P., Mohankumar, D., Manoj-Kumar, P., Makeshkumar, M., Gokulnath, M., Gurubalaji, K., Harrish, G. and Ashok, M. (2021). Energy Efficient Refrigeration System with Simultaneous Heating and Cooling. Materials Today: Proceedings, 45, 8188-8194. https://doi.org/10.1016/J.MATPR.2021.03.072

Omomule, T., Ajayi, O. and Orogun, A. (2020). Fuzzy Prediction and Pattern Analysis of Poultry Egg Production. Computers and Electronics in Agriculture, 171, 105301. https://doi.org/10.1016/j.compag.2020.105301

Pan, X., Xing, Z., Tian, C., Wang, H. and Liu, H. (2021). A Method Based on GA-LSSVM for COP Prediction and Load Regulation in the Water Chiller System. Energy and Buildings, 230, 110604. https://doi.org/10.1016/J.ENBUILD.2020.110604

Pant, P., Rajawat, A. S., Goyal, S. B., Bedi, P., Verma, C., Raboaca, M. S., & Enescu, F. M. (2022). Authentication and Authorization in Modern Web Apps for Data Security Using Nodejs and Role of Dark Web. Procedia Computer Science, 215, 781-790. https://doi.org/10.1016/J.PROCS.2022.12.080

Pardo, M. R. V., Tapia, J. A. H., Moreno, A. S. G., & Sánchez, L. F. V. (2018). Comparación de tendencias tecnológicas en aplicaciones web. 3c Tecnología: Glosas de Innovación Aplicadas a La Pyme, ISSN-e 2254-4143, Vol. 7, No. 3, 2018, Págs. 28-49, 7(3), 28-49. https://doi.org/10.17993/3ctecno.2018.v7n3e27.28-49/30

Pathak, A, Zhou, Y., Lecointre, L. et al. (2021). Polypropylene nanocomposites with high-loading conductive carbon nano-reinforcements for multifunctional applications. Applied Nanoscience, 11. 493-503. https://doi.org/10.1007/s13204-020-01594-6

Patil, S. S., Patil, Y. M., & Patil, S. B. (2023). Review on automatic variable-rate spraying systems based on orchard canopy characterization. Informatics and Automation, 22(1), 57-86.

Pedraza, A. P. (2022). Isolation and identification of metabolites produced by the native strain SGP 321 of Mucor circinelloides and evaluation of its antimicrobial activity. Obtenido de https://doi.org/10.11144/javeriana.10554.651/

Peña, D. &. (2017). Antimicrobial effect of the essential oil of Minthostachys mollis on microorganisms commonly found in lower respiratory tract infections. Journal of Science and Technology, 13 (3), 55-66.

Peñalosa, D. (2022). Análisis y evaluación del proceso de forja en la fabricación de tornillos y tuercas de acero inoxidable 304 en SISPRO S.A.

Penghui, Y., Hanguang, F., Guolu, L., Jinhai, L., & Xuebo, Z. (2020). Microstructures and properties of carbidic austempered ductile Iron containing Fe3C particles and superfine ausferrite. Materials and Design, 186, 108363. https://doi.org/10.1016/j.matdes.2019.108363

Pérez-Díaz, A., Aranda-Azaharez, R., Rivera-Espinosa, R. A., Bustamante-González, C. A., & Pérez-Suarez, Y. (2023). Indicadores de calidad para posturas microinjertadas de Theobroma cacao inoculadas con hongos micorrízicos arbusculares. Agronomía Mesoamericana, 51102-51102.

Pérez-Vergara, I. and Rojas-López, J. (2019). Lean, Six Sigma and Quantitative Tools: A Real Experience in the Productive Improvement of Processes of the Graphic Industry in Colombia. Revista de Métodos Cuantitativos Para La Economáa y La Empresa, 27(27), 259-284. https://ideas.repec.org/a/pab/rmcpee/v27y2019i1p259-284.html

Pernía, B., Añazco, K., Mero, M., Mayía, Y., & Cobos, P. (2021). Efectos del cadmio sobre la germinación y crecimiento inicial de cinco variedades de oryza sativa l. cultivadas en ecuador. Acta Agronómica, 70(1), 82-92. https://doi.org/10.15446/acag.v70n1.87636

Philippe, F., Mahmoudi, Y., Cinq-Mars, D., Lefrançois, M., Moula, N., Palacios, J., Pelletier, F. and Godbout, S. (2020). Comparison of Egg Production, Quality and Composition in Three Production Systems for Laying Hens. Livestock Science, 232, 103917. https://doi.org/10.1016/j.livsci.2020.103917

Pineda, J. F. S., Pérez, U. A., Rodriguez, A., & Rojas, E. T. (2020). Alta presencia de cadmio resulta en baja diversidad de hongos formadores de micorrizas arbusculares asociados a cacao (Theobroma cacao L.). Acta Biológica Colombiana/Acta BiolóGica Colombiana, 25(3), 333-344. https://doi.org/10.15446/abc.v25n3.78746

Pintea, A., and Manea, D. (2019). New types of mortars obtained by aditiving traditional mortars with natural polymers to increase physico-mechanical performances. Procedia Manufacturing, 32. 201-207. https://doi.org/10.1016/j.promfg.2019.02.203

Prakash-Pasupulla, A., Abebe-Agisho, H., Seetharaman, S. and Vijayakumar, S. (2022). Characterization and Analysis of TIG Welded Stainless Steel 304 Alloy Plates Using Radiography and Destructive Testing Techniques. Materials Today: Proceedings, 51, 935-938. https://doi.org/10.1016/J.MATPR.2021.06.305

Qu, Y., Pan, E., Zhu, F., Jin, F. and Roy, A. (2023). Modeling Thermoelectric Effects in Piezoelectric Semiconductors: New Fully Coupled Mechanisms for Mechanically Manipulated Heat Flux and Refrigeration. International Journal of Engineering Science, 182, 103775. https://doi.org/10.1016/J.IJENGSCI.2022.103775

Quevedo Guerrero. (2018). Calidad físico química y sensorial de granos y licor de cacao ( Theobroma cacao L.) Usando cinco métodos de fermentación.

Quezada, Quevedo, J., & García, R. (2017). Determinación del efecto del grado de madurez de las mazorcas en la producción y calidad sensorial de (Theobroma cacao L.). Revista Cientiífica Agroecosistemas, 5(1), 36-46.

Quitiaquez, P., Cocha, J., Quitiaquez, W., & Vaca, X. (2022). Investigation of geometric parameters with HSS tools in machining polyamide 6 using Taguchi method. Materials Today: Proceedings, 49, 181-187. https://doi.org/https://doi.org/10.1016/j.matpr.2021.08.002

Rahangmetan, K. A., Wullur, C. W. and Sariman, F. (2020). Effect Variations and Types of Smaw Welding Electrodes on A36 Steel to Tensile Test. Journal of Physics: Conference Series, 1569(3), 032052. https://doi.org/10.1088/1742-6596/1569/3/032052

Ramadhan, W. F., Dewi, W. N., & Nas, C. (2020). Aplikasi Web Portal Manajemen Informatika Berbasis Website Dengan Menggunakan Framework Codeigniter Dan Mysql Pada Universitas Catur Insan Cendekia. Jurnal Digit, 10(2), 124. https://doi.org/10.51920/jd.v10i2.164

Ramírez, J. D., Cabezas, K., Jiménez, P., Canelos, R. and Escobar, B. (2020). Calculation of Voltage Distribution along the Insulator Strings of a 500 kV Transmission Line Based on Finite Element Method. Enfoque UTE, 11(3), 1-14. https://doi.org/10.29019/ENFOQUEUTE.V11N3.619

Ramos-Quintero, M., Campozano-Riofrio, R. and Naranjo-Vargas, E. (2022). Análisis y Simulación de Fuerzas en el Trabajo de una Prensa Hidráulica a Planchas de Acero de Distintos Espesores Aplicadas en Perfiles Estructurales Angulares. Polo Del Conocimiento: Revista Científico - Profesional, 7(2), 1632-1655. https://doi.org/10.23857/pc.v7i2.3670

Ramos, C., Ruales, J., Rivera-Parra, J. L., Sakakibara, M., & Díaz, X. (2022). Sustainability of Cocoa (Theobroma cacao) Cultivation in the Mining District of Ponce Enríquez: A Trace Metal Approach. International journal of environmental research and public health, 19(21), 14369. https://doi.org/10.3390/ijerph192114369

Require-, G., Re-, G., Bar, R., Vessels, P., & Plate, N. A. (2014). Standard Test Methods for Rockwell Hardness of Metallic Materials 1, 2. 1-38. https://doi.org/10.1520/E0018-14.2

Ricárdez-Pérez, J. D., Gómez-Álvarez, R., Álvarez-Solís, J. D., Pat-Fernández, J. M., Jarquín-Sánchez, A., & Ramos-Reyes, R. (2020). Vermicomposta y micorriza arbuscular, su efecto en la nutrición del cacao en fase de invernadero. Ecosistemas y recursos agropecuarios, 7(3).

Rincón, C., Droh, G., Villard, L., Masclaux, F. G., N’guetta, A., Zeze, A., & Sanders, I. R. (2021). Hierarchical spatial sampling reveals factors influencing arbuscular mycorrhizal fungus diversity in Côte d’Ivoire cocoa plantations. Mycorrhiza, 31(3), 289-300. https://doi.org/10.1007/s00572-020-01019-w

Ríos-Diez, O., Serna Giraldo, C. P., & Aristizábal-Sierra, R. (2020). Desarrollo de aceros fundidos para ser tratados térmicamente mediante carbo-austemperado. Ingeniare. Revista Chilena de IngenierÃ-A, 28, 718-730. http://www.scielo.cl/scielo.php?script=sci_arttext&pid=S0718-33052020000400718&nrm=iso

Rodríguez, M., Urday, E., Pantigoso-Gómez, E. and Andrade-Tacca, C. (2022). Evaluación de Propiedades Mecánicas de un Acero Estructural A-36 en la Formación de Ferritas. Revista Iberoamericana de Ingeniería Mecánica, ISSN 1137-2729, Vol. 26, No 2, 2022, Págs. 47-59, 26(2), 47-59. https://dialnet.unirioja.es/servlet/articulo?codigo=8996231&info=resumen&idioma=ENG

Romero-Sanchez, J., Martinez-Vilchez, R., Galvez-Zarate, C., and Raymundo-Ibanez, C. (2019). Process management model in dry cleaning and fabric finishes applying Lean Manufacturing and Kaizen matrix for the textile sector. In: 39th Central America and Panama Convention, 1-6. IEEE, Guatemala (2019). https://doi.org/10.1109/CONCAPANXXXIX47272.2019.8976988

Rosalba, R. V., & Heidy Paola, S. R. (2020). Floristic diversity of the tropical dry forest in the lower and middle sinú subregion, córdoba, colombia. Revista de Biologia Tropical, 68(1), 167-179. https://doi.org/10.15517/rbt.v68i1.38286

Ruiz García, P. (2020). Estudio y mejora del FabLab UValladolid desde una perspectiva Lean Manufacturing. Universidad de Valladolid.

Sabry, A. and Ker, P. (2020). DC Environment for a Refrigerator with Variable Speed Compressor; Power Consumption Profile and Performance Comparison. IEEE Access, 8, 147973-147982. https://doi.org/10.1109/ACCESS.2020.3015579

Sabzalipour, M., & Rashidi, A. M. (2023). Machinability of martensitic and austempered ductile irons with dual matrix structure. Journal of Materials Research and Technology, 26, 6928-6941. https://doi.org/https://doi.org/10.1016/j.jmrt.2023.09.054

Saini, S. S., & Jasrotia, A. (2023). A Survey Based on Current Technologies of Web Development. TIJER, 10(6). https://www.tijer.org/papers/TIJER2306278.pdf

Sarbatly, R., Sariau, J., and Alam, M. (2021). Advances in nanofiber membrane. Materials Today: Proceedings, 46. 2118-2121. https://doi.org/10.1016/j.matpr.2021.05.483

Serrano-Aguiar, C., Calispa-Aguilar, M., Ordoñez-Viñan, M., and Choto-Chariguamán, L. (2021). Efecto de Fisuras en la Tracción de Juntas Soldadas de Acero A36 Mediante Simulación Numérica. Conciencia Digital, 4(4.2), 77-100. https://doi.org/10.33262/concienciadigital.v4i4.2.1948

Serrano, C. and Alban, D. (2022). Evaluation of Mechanical Properties and Metallographic Characterization of ASTM A36 Steel Welded Joints Under the GMAW Process. 1303-5150. https://doi.org/10.48047/nq.2022.20.22.NQ10250

Sharma, A., Georgi, M., Tregubenko, M., Tselykh, A., & Tselykh, A. (2022). Enabling smart agriculture by implementing artificial intelligence and embedded sensing. Computers & Industrial Engineering, 165, 107936.

Sharma, V., Verma, R., Pathak, V., Paliwal, M., & Jain, P. (2019). Progressive Web App (PWA)-One Stop Solution for All Application Development Across All Platforms. International Journal of Scientific Research in Computer Science, Engineering and Information Technology © 2019 IJSRCSEIT |, 5(2), 2456-3307. https://doi.org/10.32628/CSEIT1952290

Shi, J., Zou, Y., Wang, J., Zeng, X., Chu, G., Sun, B., Wang, Dan., and Chen. J. (2021). Investigation on Designing Meltblown Fibers for the Filtering Layer of a Mask by Cross-Scale Simulations. Industrial & Engineering Chemistry Research, 60(4). 1962-1971. https://doi.org/10.1021/acs.iecr.0c06232

Shreelakshmi, S. V., Chaitrashree, N., Kumar, S. S., Shetty, N. P., & Giridhar, P. (2021). Fruits of Ixora coccinea are a rich source of phytoconstituents, bioactives, exhibit antioxidant activity and cytotoxicity against human prostate carcinoma cells and development of RTS beverage. Journal of Food Processing and Preservation, 45(7), e15656. https://doi.org/10.1111/JFPP.15656

Simbaña, I., Quitiaquez, W., Estupiñán, J., Toapanta-Ramos, F. and Ramírez, L. (2022). Performance Evaluation of a Direct Expansion Solar-assisted Heat Pump by Numerical Simulation of the Throttling Process in the Expansion Device. Revista Técnica “Energía,” 19(1), 110-119. https://doi.org/10.37116/REVISTAENERGIA.V19.N1.2022.524

Simbaña, I., Quitiaquez, W., Estupiñán, J., Toapanta-Ramos, F. and Ramírez, L. (2022). Performance Evaluation of a Direct Expansion Solar-assisted Heat Pump by Numerical Simulation of the Throttling Process in the Expansion Device. Revista Técnica “Energía” 19(1), 110-119. https://doi.org/10.37116/REVISTAENERGIA.V19.N1.2022.524

Siyum, Z. G. (2020). Tropical dry forest dynamics in the context of climate change: syntheses of drivers, gaps, and management perspectives. In Ecological Processes (Vol. 9, Issue 1, pp. 1-16). Springer. https://doi.org/10.1186/s13717-020-00229-6

Smętkowska, M. and Mrugalska, B. (2018). Using Six Sigma DMAIC to Improve the Quality of the Production Process: A Case Study. Procedia - Social and Behavioral Sciences, 238, 590-596. https://doi.org/10.1016/j.sbspro.2018.04.039

Snyder, D., Allgood, C. and McRae, T. (2021). Performance Evaluation of a Flooded Ice Rink Chiller Retrofit from R-22 to R-449A. International Refrigeration and Air Conditioning Conference. https://docs.lib.purdue.edu/iracc/2126

Sokołowicz, Z., Dykiel, M., Krawczyk, J. and Augustyńska-Prejsnar, A. (2019). Effect of Layer Genotype on Physical Characteristics and Nutritive Value of Organic Eggs. CYTA - Journal of Food, 17(1), 11-19. https://doi.org/10.1080/19476337.2018.1541480

Solorzano, R., Risterucci, A., Courtois, B., Fouet, O., Jeanneau, M., Rosenquist, E., & Lanaud, C. (2009). Tracing the native ancestors of the modern theobroma cacao l. population in ecuador. Tree Genetics & Genomes, 5(3), 421-433. https://doi.org/10.1007/s11295-008-0196-3

Soltani, I., and Macosko, C. (2018). Influence of rheology and surface properties on morphology of nanofibers derived from islands-in-the-sea meltblown nonwovens. Polymer, 145. 21-30. https://doi.org/10.1016/j.polymer.2018.04.051

Song, J., Liu, G., Gong, J., Yang, Q., Zhao, Y. and Li, L. (2024). Simulation on Performance and Regulation Strategy of Centrifugal Refrigeration Compressor with Gas Bearings in Water Chiller. Applied Thermal Engineering, 236, 121650. https://doi.org/10.1016/J.APPLTHERMALENG.2023.121650

Sotnik, S., Manakov, V., & Lyashenko, V. (2023). Overview: PHP and MySQL Features for Creating Modern Web Projects. In International Journal of Academic Information Systems Research (Vol. 7, Issue 1, pp. 11-17). IJAISR. https://openarchive.nure.ua/handle/document/21601

Su, Y., Hu, B., Wang, S., Yu, X., Yang, S., Wang, S., & Liu, H. (2023). Effect of cooling rate after isothermal stage of vacuum austempering on microstructure and hardness of M50 bearing steel. Journal of Materials Research and Technology, 26, 8748-8756. https://doi.org/10.1016/j.jmrt.2023.09.162

Su, Y., Yang, S., Yu, X. F., Zhou, C. B., Liu, Y. B., Feng, X. C., Zhao, Q., & Wu, J. D. (2022). Effect of Austempering Temperature on Microstructure and Mechanical Properties of M50 Bearing Steel. Journal of Materials Research and Technology, 20, 4576-4584. https://doi.org/https://doi.org/10.1016/j.jmrt.2022.09.002

Suárez Contreras, L. &. (2021). Molecular identification of filamentous fungi and their biotechnological potential. Biotechnology in the Agricultural and Agroindustrial Secto, 194-206.

Sucari, L. R., Durán, Y. A., Yapo, E. Q., León, A. S., Quina, L. D. Q., & Torres, F. A. H. (2020). Visión artificial en reconocimiento de patrones para clasificación de frutas en agronegocios. Puriq, 2(2).

Taebnia, M., Toomla, S., Leppä, L. and Kurnitski, J. (2020). Developing Energy Calculation Methodology and Calculation Tool Validations: Application in Air-heated Ice Rink Arenas. Energy and Buildings, 226, 110389. https://doi.org/10.1016/J.ENBUILD.2020.110389

Tchiquendja-Eleno, F., Alfonso-Brindis, E., Quiza-SardiÃpmas, R., GonzÃ!`lez-Quintero, O., & Rivas-Santana, M. (2020). Optimización multiobjetivo del endurecimiento por tratamiento mecánico-térmico reiterado en acero AISI 1045. Ingeniería Mecánicanica, 23.

Tena, N., & Asuero, A. G. (2020). Antioxidant capacity of anthocyanins and other vegetal pigments. In Antioxidants (Vol. 9, Issue 8, pp. 1-3). https://doi.org/10.3390/antiox9080665

Test Resources. (2024). 315 Universal Test Machines. https://www.testresources.net/test-machines/universal-testing-machines/300-series/315

Tezara, Valencia, E., Reynel, V., Bolaños, M., & Flores, H. (2020). Photosynthetic activity of ten national cocoa clones and their relationship to yield. Espam Ciencia Para El Agro, 11(1), 19-27.

Tezara, W., Urich, R., Jaimez, R., Coronel, I., Araque, O., Azócar, C., & Chacón, I. (2016). Does criollo cocoa have the same ecophysiological characteristics than forastero?. Botanical Sciences, 94(3), 563-574. https://doi.org/10.17129/botsci.552

Tingting Li, J. T. (2020). Co-culture of Trichoderma atroviride SG3403 and Bacillus subtilis 22 improves the production of antifungal secondary metabolites. ELSEVIER, 8.

Tirado, L. and Abril, J. (2020). Quality and Poultry Sector of the Province of Tungurahua. Revista de Investigación, Formación y Desarrollo: Generando Productividad In-stitucional, 8(2). 15-31.15-31. https://dialnet.unirioja.es/servlet/articulo?codigo=8273677

Tissir, S., El Fezazi, S., and Cherrafi, A. (2020). Industry 4.0 impact on Lean Manufacturing: Literature Review. In: 13th International Colloquium of Logistics and Supply Chain Management, 1-5. IEEE, Marruecos (2020). https://doi.org/10.1109/LOGISTIQUA49782.2020.9353889

Touaibi, R. and Koten, H. (2021). Energy Analysis of Vapor Compression Refrigeration Cycle Using a New Generation Refrigerants with Low Global Warming Potential. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 87(2), 106-117. https://doi.org/10.37934/arfmts.87.2.106117

Troughton, M. Handbook of Plastics Joining, 2nd ed., vol. 1. NY: Elsevier Science & Technology Books (2008).

Ugr, O. L. and Canatan, H. (2015). Literature Search Consisting of the Areas of Six Sigma’s Usage. 195(0212), 695-704. https://doi.org/10.1016/j.sbspro.2015.06.160

Unda, S., Galarza, I., & Mora, E. (2021). Comparación de niveles de cadmio en hojas, testa y almendra en cultivares de theobroma cacao. Ciencia Unemi, 14(37), 73-80. https://doi.org/10.29076/issn.2528-7737vol14iss37.2021pp73-80p

Valderrama-Mendoza, M., Rodríguez-Urrego, L., Cobo, L. and Martínez, G. (2019). Sistema de Análisis para el Incremento de la Producción de Granjas Avícolas en Colombia. Caso de estudio: Proyecto Proavícola. Avances: Investigación en Ingeniería, 16(1), 1-16. https://doi.org/10.18041/1794-4953/avances.1.5254

Vallejos-Torres, G., Ruíz-Valles, R., María, C., Gaona-Jimenez, N., & Marín, C. (2021). Una alta diversidad de hongos micorrízicos arbusculares influye en la absorción de cadmio y crecimiento vegetal del cacao. Bioagro, 34(1), 75-84. https://doi.org/10.51372/bioagro341.7

Vantyghem, G., De Corte, W., Shakour, E. and Amir, O. (2020). 3D Printing of a Post-tensioned Concrete Girder Designed by Topology Optimization. Automation in Construction, 112, 103084. https://doi.org/10.1016/J.AUTCON.2020.103084

Varshney, A., Sangal, S., Pramanick, A. K., & Mondal, K. (2020). On the extent of transformation of austenite to bainitic ferrite and carbide during austempering of high Si steel for prolonged duration and its effect on mechanical properties. Materials Science and Engineering: A, 793, 139764. https://doi.org/10.1016/j.msea.2020.139764

Vásquez, Intriago, F., & Alvarado, K. (2023). Extracto de (banano y manzana) con micoorganismos eficientes y su efecto en la disminución de cadmio en almendras de cacao (Theobroma cacao L.). CCIUTM, 6, 1-941.

Vásquez, Vera, J., Erazo, C., & Intriago, F. (2022). Induction of rhizobium japonicum in the fermentative mass of two varieties of cacao (Theobroma Cacao L.) as a strategy for the decrease of cadmium. International Journal of Health Sciences, 3(April), 11354-11371. https://doi.org/https://doi.org/10.53730/ijhs.v6nS3.8672 Induction

Vera, & Goya, A. (2015). Comportamiento agronómico, calidad física y sensorial de 21 líneas híbridas de cacao (Theobroma cacao L.). Revista La Tecnica, 15, 26-37. https://doi.org/https://doi.org/10.33936/la_tecnica.v0i15.539

Vera, & Salazar, M. (2021). Aplicación de siete bioles sobre el desarrollo agronómico en cacao (Theobroma cacao L.) De origen sexual y asexual en etapa productiva en la finca experimental la represa. Centrosur, 1(1), 1-43.

Vera, Intriago, F., Alvarado, K., & Vasquez, L. (2022). Inducción anaérobica de bradyrhizobium japonicum en la postcosecha de híbridos experimentales de cacao y su mejoramiento en la calidad fermentativa. Journal of Science and Research, 7(2), 50-69. https://doi.org/https://doi.org/10.5281/zenodo.7723254 AUTORES:

Vera, Ramos, R., Sánchez, F., Chévez, H., Veliz, B., & Pinargote, J. (2019). Caracterización física y sensorial de treinta materiales élites de cacao (Theobroma cacao L.) en la cuenca alta de rio Guayas - Ecuador. CONAMTI, 5(22), 115-124.

Vera, Torres, A., Vásquez, L., Alvarado, K., & Intriago, F. (2023). Extraction of cocoa powder for the preparation of a drink by adding mucilage and guava. Sarhad Journal of Agriculture, 39(2), 1-10. https://doi.org/https://dx.doi.org/10.17582/journal.sja/2023/39/s2.10.18

Vera, Vallejo, C., Párraga, D., Morales, W., Macias, J., & Ramos, R. (2014). Physical-chemical and sensory atributes of the cocoa Nacional (Theobroma cacao L.)n fifteen clones beans in Ecuador. Science and Technology Magazine, 7(2), 21-34. https://doi.org/https://doi.org/10.18779/cyt.v7i2.139

Vera. (2018). Resumen de principios de diseños experimentales (Compás, Ed.).

Villacis, A., Alwang, J., Barrera, V., & Domínguez, J. (2022). Prices, specialty varieties, and postharvest practices: insights from cacao value chains in ecuador. Agribusiness, 38(2), 426-458. https://doi.org/10.1002/agr.21730

Villacis, A., Barrera, V., Alwang, J., Caicedo, C., & Quiroz, J. (2022). Strategies to strengthen ecuador’s high-value cacao value chain.. https://doi.org/10.18235/0003960

Villamil, Viteri, S., & Villegas, W. (2015). Aplication of microbial ntagonist for the biological control of Moniliophthora roreri Cif & Parc in Theobroma cacao L. under field conditions. Journal of the National Faculty of Agronomy Medellin, 68(1), 7441-7450. https://doi.org/https://doi.org/10.15446/rfnam.v68n1.47830.

Wang, K., Hu, F., Zhou, W., Zhang, D., Yin, C., Yershov, S., & Wu, K. (2023). Effect of refined multi-scale microstructures on the ultra-high impact toughness of bainitic steel austempered below Ms temperature. Journal of Materials Research and Technology, 26, 5773-5785. https://doi.org/10.1016/j.jmrt.2023.09.003

Wei, W., Peng, F., Li, Y., Chen, B., Xu, Y. and Wei, Y. (2021). Optimization Design of Extrusion Roller of RP1814 Roller Press Based on ANSYS Workbench. Applied Sciences 2021, Vol. 11, Page 9584, 11(20), 9584. https://doi.org/10.3390/APP11209584

Wu, J., Zhou, H., Zhou, J., Zhu, X., Zhang, B., Feng, S., Zhong, Z., Kong, L., Xing. W. (2021). Meltblown fabric vs nanofiber membrane, which is better for fabricating personal protective equipments. Chinese Journal of Chemical Engineering, 36. 1-9. https://doi.org/10.1016/j.cjche.2020.10.022

Yildirim, R., Kumas, K., Akyuz, A. and Gungor, A. (2023). Numerical Analysis of Using R449A Refrigerant Alternative to R404A in Cooling Systems: 3E-Analysis (Energetic, Exergetic, and Environmental). Politeknik Dergisi, 26(4), 1319-1325. https://doi.org/10.2339/politeknik.1073335

Zamora. (2018). Cambio Climático. Revista Mexicana de Ciencias Forestales, 6(31), 4-7.

Zhou, H., Li, Y., Yin, Z., Ran, M., Liu, S., Huang, Y., Zhang, W., Zheng, W., & Liu, J. (2020). Microstructure and mechanical behaviors of grinding balls produced by dual matrix structure two-step austempering process. Journal of Materials Research and Technology, 9(3), 4672-4681. https://doi.org/10.1016/j.jmrt.2020.02.095

Zhou, H., Wang, X., Au, W., et al. (2021). Intelligent Robots for Fruit Harvesting: Recent Developments and Future Challenges. Preprint available at Research Square.

Zhou, T., McBride, K., Linke, S., Song, Z. and Sundmacher, K. (2020). Computer-aided solvent selection and design for efficient chemical processes. Current Opinion in Chemical Engineering, 27, 35-44. https://doi.org/10.1016/J.COCHE.2019.10.007

Ziegler, M. G. (2022). Web 2.0 and Knowledge Sharing. A Literature Review. Intech Open, 2022, 1-14. https://doi.org/10.5772/ACRT.03

Zug, K., Yupanqui, H., Meyberg, F., Cierjacks, J., & Cierjacks, A. (2019). Cadmium accumulation in peruvian cacao (theobroma cacao l.) and opportunities for mitigation. Water Air & Soil Pollution, 230(3). https://doi.org/10.1007/s11270-019-4109-x

Zuno-Silva, J., Bedolla-Jacuinde, A., Ortiz Dominguez, M., Borja-Soto, C., Ruiz-Lopez, I., & Rodriguez-Muñoz, J. L. (2023). Mejora de la resistencia al desgaste de troqueles para forja en caliente utilizando aceros grado herramienta aleados con Vanadio y Boro. Ingenio y Conciencia Boletín Científico de La Escuela Superior Ciudad Sahagún, 10(20), 75-78. https://doi.org/10.29057/escs.v10i20.10846